First, the method of removing the traces of transparent adhesive
1, the use of eraser, eraser to remove transparent adhesive traces is also very effective, but it is only suitable for a small range of traces.
2. Use a wet towel, which is probably what we thought of when we first noticed the traces of cellophane tape. We can wet the offset print with a wet towel, and then slowly wipe, but this method is limited to the place that is not afraid of sticky wet.
3, the use of alcohol to wipe, first of all, when using this method must be determined in advance to wipe the place is not afraid of fading, with a cloth stick alcohol after slowly wipe, until erase.
4, detergent also has the effect of removing the traces of transparent adhesive, the use of steps is the same as other methods.
5, ordinary nail polish remover because of the chemical composition in it, so the effect of removing the traces of transparent glue is also very good.
Two, the removal of double-sided adhesive
1, first do not tear off that layer of paper, blow heat with a hair dryer, then take it can be taken down.
2. If you have left black marks, you can use the white flower oil at home to smear some on it, wipe it with a rag, and clean it with clean water. If there is no white flower oil in the home, you can use the essence of wind oil or oil and other things, repeatedly rubbed.
3, if the part of the paste, black print is not big, you can use an eraser to wipe. If the area is larger, can use anhydrous alcohol, namely industrial alcohol, besmear is in the position of stickup, wipe with cloth next.
4. Cover the whole area with a dry cloth covered with vinegar. When the double-sided tape is completely soaked, you can gently scrape it off with a ruler.
Three, foam double-sided adhesive removal method
1, if it is stuck on the wall, you can use a sharp thing to scrape off a small corner, and then use your hand to tear down the small corner. This method is tiring, but it doesn't leave a trace.
2. If it is stuck on the plastic, dip it in hot water with a towel first, wet all the foam double-sided tape, and then find the small corner and slowly scrape it off.
3. If you stick it on the glass, you can try to use detergent. Take some detergent and put it on a semi-wet cloth and wipe it back and forth several times. If it is a harder mark, you can drench the mark first, and then use detergent powder.
4, first soak the cloth with warm water, and then wipe the trace position, wipe the side, generally spray detergent, offset printing will become soft for a while, it is easy to remove.
Four, the removal of double-sided tape on the wall
1, first use nail polish paint to light water to wipe a look. Because of the light water can make the original color of the wall off. This method is recommended to use in the small area is not obvious, if the large area, conspicuous wall is not recommended to use.
2. The method of heating is to soften the double-sided adhesive tape, blow it with a hair dryer, wait until the paste of the double-sided adhesive tape becomes soft, and the traces can be easily removed.
3. We can take a piece of dry cloth covered with vinegar to cover the whole place where the double-sided tape traces are. After the stains of the double-sided tape are completely soaked, they can be easily removed with a ruler.
|
